Toshiba Tohsiba Electromagnetic Flowmeter Converter L5232 - Manual (Page 170)

6F8A0917
- 169 -
15.2 Model Number Table
LF232*A, LF232*B Converter model number table
Model number Specification code
1 2 3 4 5 6 7 8 9 10 11 12
Description
L F 2 3 2 Separate type converter
Purpose
A Standard
Compatible detector (Note 1) (Note 2) (Note 3)
A Medium to small size (Meter size: 1/10” to 18”(2.5 to 450mm))
B Large size (Meter size 20” to 120” (500 to 3000mm))
Mounting nuts and bolts
C Panel, wall mounting (BNP material: SUS304)
E Pipe mounting (BNP material: SUS304)
Digital input/output
1 Current output
+ Digital outputs points (1 point)
3 Current output
+ Digital outputs points (4 point) + Digital nputs points (2 point)
Communication function
1 HART communication
Power supply
1 100 to 240VAC, 50/60Hz (Note 2)
2 24VDC (Note 3)
A Standard
• Note 1: For applicable detector code, select one from the following table.
To combine with an existing detector, select one depending on the type of replaceable converters.
For combination with detectors not listed below, contact Toshiba.
Applicable
detector code Applicable
detector Applicable detector
(discontinued model)
Replaceable converters
A LF470 type
334,
335 type (Converters of
types shown right) 372, LF200, LF220,
LF420, LF230* A type
B LF150 type
337,
335 type (Converters of
types shown right) 373, 378, LF230* B type
• Note 2: When the 7th digit is “B” and power supply specification code is “1”, power supply specification
is 100 to 120VAC.
• Note 3: 24VDC can be specified only when the 7th digit is “A”.