Toshiba Tohsiba Electromagnetic Flowmeter Converter L5232 - Manual (Page 75)

6F8A0917
- 74 -
Hysteresis
The dead band, which is used to switch the ranges in the case of internal automatic switching
multi-range, is set here.
It is not necessary to set hysteresis in other range types. (The set value will be ignored.)
The hysteresis can be set within the range of 0 to 25% in increments of 0.1%.
Span value (range) setting flow
The setting sequence of span value (range) is shown below.
Item selection of span value (range) setting
C1: RANGE TYPE : Range type setting
C2: RANGE 1
: Range 1 span value and unit setting
C3: RANGE 2
: Range 2 span value
C4: RANGE 3
: Range 3 span value
C5: RANGE 4
: Range 4 span value
C6: RANGE HYST : Hysteresis setting