Toshiba Tohsiba Electromagnetic Flowmeter Converter L5232 - Manual (Page 5)

6F8A0917
- 4 -
SAFETY PRECAUTIONS
(continued)
Safety Precautions for Maintenance and Inspection
Do not touch the LF232 main body when high
temperature fluid is being measured.
Do not conduct wiring work when power is
applied.
DON’T
The fluid raises the main body
temperature and can cause burns
when touched.
DON’T
Wiring while power is applied can
cause electric shock.
Do not conduct wiring work with wet hands.
DON’T
Wet hands may result in electric
shock.
The label shown left is placed near
the terminal board for power input.
(A black border and symbol on
yellow triangle)
Be alert to electric shock.
Do not use a fuse other than the one specified.
DON’T
Using a fuse other than the one
specified can cause system failure,
damage or malfunction.
Use a rated fuse as follows:
Fuse rating:
• 1A/250V for 100 to 240Vac or 110Vdc
• 2A/250V for 24 Vdc or large meter size spec.
100Vac or partially filled pipes spec. 100Vac
Dimensions: Diameter 5.2 mm × 20 mm
Melting time characteristic: Normal blow
Usage limitation
(1) This product is not manufactured for applying to a system requiring safety directly involved human
life as follows. Please contact your nearest Toshiba reprehensive if there is a possibility of using
this product for such use.
− Main control systems of nuclear power plants, safety protection systems in nuclear facilities or
other important systems requiring safety
− Medical control systems relating to life support
(2) This product is not approved for explosion-proof applications. Please do not use this product in an
explosive atmosphere (explosion protection area).
Warranty and Limitation of Liability
Toshiba does not accept liability for any damage or loss, material or personal, caused as a direct or
indirect result of the operation of this product in connection with, or due to, the occurrence of any
event of force majeure (including fire or earthquake) or the misuse of this product, whether intentional
or accidental.