Toshiba Tohsiba Electromagnetic Flowmeter Converter L5232 - Manual (Page 110)

6F8A0917
- 109 -
Changing the self-diagnosis function setting
The following is an example to change the self-diagnosis function from Self-diagnosis function On
(1:ON) to Self-diagnosis function Off (2:OFF).
To change the setting for alarm output factors, select the function “L3: ALM PRESET.”
Switch operation Display example Description
L2: SELF CHECK
1:ON
Select L2: SELF CHEK from the setting item selection menu.
Whether the self-diagnosis function is used (On) or not (Off)
appears.
L2: SELF CHECK
1:ON
The cursor appears.
L2: SELF CHECK
2:OFF
Press to set the self-diagnosis function to OFF.
L2: SELF CHECK
2:OFF
The display blinks and the set value is displayed for
confirmation.
Press MENU/ENT again to write the data. Then the cursor
disappears and the display returns to the condition that the
setting value is displayed.
L2: SELF CHECK
Returns to the menu of setting item selection.