Samsung S3F401F User Manual
Page 32
S3F401F_UM_REV1.00
A/D CONVERTER
2-5
3.1.3 Standby Mode
Standby mode is activated when ADCCON.1 is set to '0'. In this mode, A/D conversion operation is halted and all
ADC result registers are set to ‘0’.
3.1.4 ADC Interrupt
The ADC generates an EOC interrupt when conversion is completed while ADC interrupt is enabled. You can
know if whether that interrupt occurs or not by reading the interrupt pending register. This interrupt bit can be
enabled or disabled using respectively the interrupt enable register and interrupt disable register.
NOTE
If you know whether an interrupt from ADC (EOC) occurs or not, read and check the EOC bit in the
interrupt pending register. It can cause the different result to read ADCSTATUS.0 (STATUS) bit to check
EOC interrupt.
- 100000 (2 pages)
- SPINPOINT MP4 HM320HJ (1 page)
- SPINPOINT MP2 HM201JJ (1 page)
- HN-M750MBB (1 page)
- SH-S223L (33 pages)
- F8274X (324 pages)
- SPINPOINT HS08XJF (1 page)
- DDR3 (21 pages)
- DLP TV SP67L6HX (64 pages)
- M471B1G73AH0 (31 pages)
- BN68-01416A-00 (425 pages)
- SWL-2200C (82 pages)
- SMG-3200 (228 pages)
- SADT-100EC (11 pages)
- SADT-104WM (12 pages)
- G2 PORTABLE HX-MU025DC (1 page)
- TruDirect BG68-01526A (9 pages)
- SADT-100HM (8 pages)
- TS-H663D (33 pages)
- MUXONENAND A-DIE KFN4G16Q2A (173 pages)
- SPINPOINT HS120JR (1 page)
- TrueDirect SH-S203S (16 pages)
- COMBO DRIVE SM-316 (10 pages)
- M391B5273DH0 (36 pages)
- SWL-2210P (67 pages)
- SC-140 (4 pages)
- TS-HB33 (31 pages)
- Color Dual Quad Network Observation System SSC21WEB (103 pages)
- BF68-00160B (60 pages)
- RIF-BT10 (17 pages)
- TS-HB43L (37 pages)
- TS-H292A (25 pages)
- Computer Drive (1 page)
- CAPLIO 400G (1 page)
- SWL-3000AP (88 pages)
- SCS-26UC4 (67 pages)
- SCS-26UC4 (6 pages)
- SWL-2100N (75 pages)
- SH-S223C (34 pages)
- FLEX-MUXONENAND KFM4GH6Q4M (142 pages)
- SNS-100/400 (38 pages)
- SWL-4000AP (89 pages)
- iDCS 500-DCS (32 pages)
- SN-324 (5 pages)