Siemens Simatic S7-400 - Manual (Page 453)

CPUs for M7-400
11-25
S7-400, M7-400 Programmable Controllers Module Specifications
A5E00069467-07
What is the Purpose of the Setup Page?
This setup page contains notes that help you to use the Setup menu.
OK Button
Activating this button returns to the Setup menu.
11.4.6 Setup Page “IF modules”
Opening the Setup Page
If you have selected “IF Modules” and activated the OPEN button in the Setup
menu (Figure 11-9 on page 11-23), this setup page appears on the screen
(Figure 11-12)
Figure 11-12 “IF Modules” Setup Page
What is the Purpose of the Setup Page?
If you have expanded your CPU with expansion modules, you can configure the
interface submodules used in the expansion modules on this setup page. See the
“Interface Submodules” and “M7-400 Expansions” chapters for the settings you
require.
You should only change the settings if you need to, otherwise the default settings
should be used.
Representation of Information
Information cannot be edited. It is shown on this setup page in gray type. The gray
type is not available in Remote Setup and is replaced there with black type.