Siemens Simatic S7-400 - Manual (Page 452)

CPUs for M7-400
11-24
S7-400, M7-400 Programmable Controllers Module Specifications
A5E00069467-07
Exiting the BIOS Setup
To exit the BIOS setup, activate the EXIT button shown in Figure 11-9 or press
ESC . The “Setup Exit” dialog box then appears (see Figure 11-10).
Figure 11-10 “Setup Exit” Dialog Box
Here you have the following choices:
• SAVE
saves the parameters to the CMOS and then runs a cold restart.
• EXIT
exits the setup without saving the parameters to the CMOS and then runs a cold
restart (power off/on with initialization of all blocks).
• RETURN
returns to the setup. All changes that were made since Setup was opened are
abandoned.
11.4.5 Setup Page “User Help”
Opening the Setup Page
If you have selected “User Help” and activated the OPEN button in the Setup menu
(Figure 11-9 on page 11-23), this setup page appears on the screen (Figure 11-11).
Figure 11-11 “User Help” Setup Page