Siemens Simatic S7-400 - Manual (Page 32)

General Technical Specifications
1-4
S7-400, M7-400 Programmable Controllers Module Specifications
A5E00069467-07
Mark for Australia and New Zealand
Our products satisfy the requirements of Standard AS/NZS 2064 (Class A).
Note
You will recognize the approval assigned to your product from the mark on the
identification label. The opprovals are listed below UL/CSA or cULus.
UL Approval
UL recognition mark
Underwriters Laboratories (UL) to the UL 508 Standard:
• Report E 85972
• Report 143289 for the modules in Table 1-3
CSA Approval
CSA certification mark
Canadian Standard Association (CSA) to Standard C 22.2 No. 142:
• Certification Record 212191-0-000
• Report 111 879 for the modules in Table 1-3
or
cULus Approval
Underwriters Laboratories Inc. nach
S
UL 508 (Industrial Control Equipment)
S
CSA C22.2 No. 142 (Pocess Control Equipment)