KORG PA4X 76 - Manual (Page 896)

892| File management
Loading data from other instruments
Loading data from Pa-Series instruments
You can load most data from KORG Pa-Series instruments. The following
table shows what you can load from the other instruments. Please remem-
ber to save the converted data after loading.
Load from Loaded data
Pa3X You can load most data as if they were Pa4X data. There are however a
few exceptions to be considered:
• Performances and STSs are converted to Keyboard Sets.
• Due to the different order in memory, Factory Styles must be manu-
ally reassigned to SongBook Entries by using the KORG
SongBook Editor
software.
• Favorite Style banks over #10 are missing and are not loaded. Since
Pa4X banks are larger, load the individual Styles into the additional loca-
tions of the other banks.
• Performance banks over #11 are missing and are not loaded. Since
Pa4X Keyboard Set banks are larger, load the individual Performances
into the additional locations of the other banks.
• Since the number of Insert and Master FX is different, the effects con-
figuration can be different.
• Voice Processor Presets with the MP3 Audio harmony type are reset.
• Compressed User Samples exceeding about 200 MB (400 MB uncom-
pressed or ‘linear’) are not loaded.
• Global settings are not loaded.
Pa3XLe, Pa900,
Pa600, Pa300,
HAVIAN 30
You can load most data as if they were Pa4X data. There are however a
few exceptions to be considered:
• Performances and STSs are converted to Keyboard Sets.
• Due to the different order in memory, Factory Styles must be manu-
ally reassigned to SongBook Entries by using the KORG SongBook Editor
software.
• Favorite Style banks over #10 are missing and are not loaded. Since
Pa4X banks are larger, load the individual Styles into the additional loca-
tions of the other banks.
• When available, Voice Processor Presets with the MP3 Audio harmony
type are reset.
• Global settings are not loaded.