KORG PA4X 76 - Manual (Page 239)

Recording the Styles and Pads |235
For example, you may have CV Length = 4 and Rec Length = 4. If you set
CV Length to 2, and press START/STOP to begin recording, Rec Length is
still shown as 4, but it is in reality set to 2, and recording will cycle for just
2 measures. After you press START/ STOP to stop recording, Rec Length is
updated to 2, and all measures after the second measure are deleted.
Tempo, Meter, Resolution
Setting the recording Tempo
While recording, you might want to use a different Tempo than the one saved
in the Style Settings. This alternative value will allow you, for example, to re-
cord at a slower speed, or to experiment with different values while listening
what you recorded.
When playing Pads, the Tempo is always the one of the most recently se-
lected Style or MIDI Song.
▪ Use the Tempo parameter to set the recording Tempo value.
As an alternative, use the TEMPO buttons to change the recording Tempo.
This value will not be saved in the Style or Pad.
Hint: In case you want to create Tempo variations in a Style, insert Tempo Change
events in the Master Track (Style Record > Event Edit page). Pads always take Tempo
values from the Style or Song.
Choosing the Meter of the Style Element or Pad
▪ Use the Meter parameter to set the meter (time signature) of the Style
Element or Pad.
You can only edit this parameter if the Style Element or Pad is still empty.