KORG PA4X 76 - Manual (Page 685)

Effect parameters |681
c Fine [cents] –100…+100 Sets the pitch shift amount in steps
of one cent
Amt –100…+100 Sets the modulation amount of
pitch shift amount Sets the modula-
tion amount of pitch shift amount
d BPM MIDI,
40.00…
300.00
MIDI syncs to the system tempo;
40–300 sets the tempo manually
for this individual effect
Time Over? L ---, OVER! Display the error message if the left
channel delay time exceeds the up-
per limit
R ---, OVER! Display the error message if the
right channel delay time exceeds
the upper limit
e L Delay Base Note
…
Selects the type of notes to specify
the left channel delay time
Times x1…x32 Sets the number of notes to specify
the left channel delay time
f R Delay Base Note
…
Selects the type of notes to specify
the right channel delay time
Times x1…x32 Sets the number of notes to specify
the right channel delay time
g Feedback Position Pre, Post Switches the feedback connection
Spread –100…+100 Sets the width of the stereo image
of the effect sound
h Feedback –100…+100 Sets the feedback amount
High Damp [%] 0…100 Sets the damping amount in the
high range
i Input Level Dmod
[%] –100…+100 Sets the modulation amount of the
input level
Src Off…Tempo Selects the modulation source for
the input level
j Wet/Dry Dry, 1:99…99:1, Wet Balance between the wet and dry
signal
Src Off…Tempo See DMS (Dynamic Modulation
Source)
Amt –100…+100 Amount of modulation source