KORG PA4X 76 User Manual
Page 884
880| Audio In/Out and the Voice Processor
spaces and to provide audio separation between the dry signal and the re-
verb effect.
▪
Use the
Hi Color / Lo Color
parameters to adjust the corresponding pre-
set-frequency filters inserted into the Reverb feedback path that tailor the
low and high frequency response and decay of the tails. Values toward -50
will cut response in its respective band and a values toward 50 increase
response.
▪
Use the
Duck Amount
parameter to set the effect attenuation. When Ducking
has a value other than Off, the Reverb block’s output will be reduced while
you are singing. At the end of a sung phrase, the effects return to the level
you set, increasing the clarity of your vocals while still sounding very wet.
This parameter sets the amount of attenuation for Ducking.
Mixing in the lead voice
▪
Use the
Lead Level
parameter to adjust the level of the lead voice mixed with
the effect.