KORG PA4X 76 - Manual (Page 1038)

1034| Appendix
2 Now locate the front (d1) and the rear (d2) side of the speaker box, to be sure
you will place it in the right way.
d2
d1
3 Lift the speaker box (d) by making the back side (d2) look toward you and the
front side (d1) toward the Pa4X. Align its extruding guide (e) to the match-
ing slot (f) on the back of the instrument (a). Slightly tilt the speaker box (d)
forward, to prevent the fixing pin (k, see below) to damage the back of the
instrument. To align them correctly, use one of the two plastic stoppers/
delimiters (h) as a reference point, making one of the flanks or the speaker
box’s guide (e) touch it.
e
f
h
d
a