KORG PA4X 76 - Manual (Page 537)

Effect parameters |533
Hold Delay
This effect records the input signal and plays it back repeatedly. You can
control the start of recording and reset via a modulation source. Easy to use
for real-time performances.
Left
Right
FX Amt
FX Amt
FX Amt = 100: Mono In - Stereo Out / FX Amt = 0: Stereo In - Stereo Out
Pan
Delay
D
-mod
D
-mod
Loop Time: Auto/ ...5400ms
+
Tempo
BPM
BPM Base Note x Times
REC Control
RST Control
a Loop Time [msec] Auto, 1…10800 Sets Automatic loop time setup mode
or specifies loop time
b Loop BPM Sync Off, On Specifies whether delay time is set in
milliseconds, or as a note value relative
to tempo
c BPM MIDI,
40.00…
300.00 MIDI syncs to the system tempo; 40–
300 sets the tempo manually for this
individual effect
Time Over? ---, OVER! An error indication that appears if de-
lay time exceeds the upper limit when
MIDI/Tempo Sync=On
d Loop Base Note
…
Selects the type of notes to specify the
delay time
Times x1…x32 Sets the number of notes to specify the
delay time
e REC Control Src Off…Tempo Selects control source for recording
f RST Control Src Off…Tempo Selects control source for reset
g Manual REC Control REC Off,
REC On
Sets the recording switch
h Manual RST Control Off, RESET Sets the reset switch
i Pan L100…L1, C, R1…
R100
Sets the stereo image of the effect
Src Off…Tempo Selects the modulation source of ste-
reo image of the effect
Amt –100…+100 Sets the modulation amount of stereo
image of the effect