KORG PA4X 76 - Manual (Page 681)

Effect parameters |677
Pitch Shift Mod (Pitch Shift Modulation)
This effect modulates the detuned pitch shift amount using an LFO, adding
a clear spread and width to the sound by panning the effect sound and dry
sound to the left and right. This is especially effective when the effect sound
and dry sound output from stereo speakers are mixed.
Left
Right
FX Amt
FX Amt
FX Amt = 100: Mono In - Stereo Out / FX Amt = 0: Stereo In - Stereo Out
LFO: Tri / Sqr
Pan
+
Pitch Shifter
a Pitch Shift [cents] –100…+100 Sets the pitch difference from the input
signal
b LFO Waveform Triangle, Square Selects the LFO Waveform
c LFO Frequency
[Hz] 0.02…20.00 Sets the speed of the LFO
Src Off…Tempo Selects a modulation source for LFO speed
Amt –20.00…
+20.00 Sets the modulation amount of LFO speed
d MIDI Sync Off, On When this is on, the LFO speed is set by
BPM, Base Note, and Times, instead of
Frequency
BPM MIDI,
40.00…
300.00
MIDI syncs to the system tempo; 40–300
sets the tempo manually for this individual
effect
Base Note
…
Selects the type of notes that specify the
LFO speed
Times x1…x32 Sets the number of notes that specify the
LFO speed
e Depth –100…+100 Sets the LFO modulation depth for pitch
shift amount
Src Off…Tempo Selects the modulation source of the depth
of modulation
Amt –100…+100 Sets the modulation amount of the depth
of modulation
f Pan L, 1 : 99…99 : 1, R Sets the panning effect sound and dry
sound separately