KORG PA4X 76 - Manual (Page 180)

176| Customizing and editing the Sound sets
Quick editing of Drum Kits
You can adjust the volume and edit the main parameters for each family of
Drum and Percussion instrument for the selected track. A list of families is
shown below.
These parameters can be accessed only on tracks set to the Drum mode
in the Track Controls > Mode page. Use them on tracks with a Drum Kit as-
signed, or you will not be able to hear any change.
Edit the Drum Kits
1 Go to the Track Controls > Drum Edit page.
2 If you like, start the Style or Song to listen to the changes during playback.
3 If you like, solo the track you are editing, to isolate it from the other tracks.
4 Use the Select buttons to select a track set to Drum mode (usually, the Drum
and Percussion tracks).
After selecting a track set in Drum mode, the parameters in the page can be
selected (otherwise, they remain dimmed).