KORG PA4X 76 - Manual (Page 478)

474| Customizing and editing the Sounds
Creating new Drum Kits from percussive
samples
You can create a new Drum Kit while in Sound mode.
1 Go to the Sound mode.
2 Choose a Drum Kit similar to the one you are going to create.
If you prefer to start from a blank, default situation, choose the Initialize
Sound command from the page menu .
3 Go to the Sound > DrumKit > DrumKit page.
4 Use the KEY parameter to select a key. As an alternative, select it by press-
ing a key on the keyboard.
5 Select one of the available layers from the radio buttons under the keyboard
diagram.
6 Use the parameters in the Drum Sample section to assign a sample to the
current layer or the selected oscillator. Your new sample can be found in the
RAM bank of samples.
7 Go on editing the Drum Kit, as shown in the pages dedicated to Sound edit-
ing.