KORG PA4X 76 - Manual (Page 355)

Editing the MIDI Songs |351
Converting notes to RX Noises
You can use the RX Convert page to convert notes of a Standard MIDI File
into RX Noises, and vice-versa. This will help programming Songs on an ex-
ternal sequencer.
1 Go to the Sequencer > Song Edit > RX Convert page.
2 Use the Track parameter to choose the track to edit.
track Meaning
All All tracks.
Track 1 … 16 Selected track.
▪ Use the RX Notes Velocity parameter to set the volume level of the RX
Noises in the selected track(s), then touch the Execute button.
▪ Touch the Execute button next to the Add RX Noises to Guitar Tracks pa-
rameter to automatically analyze the Standard MIDI File, and add RX Noises
to Guitar tracks.
This command scans a single track or the whole Standard MIDI File, looking
for guitar strumming played by nylon, steel or electric guitars. After scan-
ning, a suitable Guitar sound will be automatically assigned to the relevant
tracks, and RX Noises automatically added where needed.
▪ Touch the Execute button next to the Convert RX Noises to MIDI Notes pa-
rameter to convert the RX Noises contained in the selected track to ordinary
MIDI Notes.
▪ Touch the Execute button next to the Convert MIDI Notes to RX Noises
parameter to convert all the relevant MIDI Notes in the selected track to RX
Noises.