KORG PA4X 76 - Manual (Page 585)

Effect parameters |581
a OSC Mode Fixed, Note (Key
Follow) Switching between specifying the oscillator
frequency and using a note number
Pre LPF 0…100 Sets the damping amount of the high range
input to the ring modulator
b Fixed Frequency
[Hz]
0…12.00k Sets the oscillator frequency when OSC
Mode is set to Fixed
Src Off…Tempo Selects the modulation source for the os-
cillator frequency when OSC Mode is set to
Fixed
Amt –12.00k…
+12.00k Sets the modulation amount of the oscillator
frequency when OSC Mode is set to Fixed
c Note Offset –48…+48 Sets the pitch difference from the original
note when OSC Mode is set to Note (Key
Follow)
Note Fine –100…+100 Fine-adjusts the oscillator frequency
d LFO Frequency
[Hz] 0.02…20.00 Sets the speed of the LFO
Src Off…Tempo Selects a modulation source for LFO speed
Amt –20.00…
+20.00 Sets the modulation amount of LFO speed
e MIDI Sync Off, On When this is on, the LFO speed is set by BPM,
Base Note, and Times, instead of Frequency
BPM MIDI,
40.00…
300.00 MIDI syncs to the system tempo; 40–300
sets the tempo manually for this individual
effect
Base Note
…
Selects the type of notes that specify the
LFO speed
Times x1…x32 Sets the number of notes that specify the
LFO speed
f LFO Depth 0…100 Sets the depth of LFO modulation for the os-
cillator frequency
Src Off…Tempo Selects the modulation source of the depth
of modulation
Amt –100…+100 Sets the modulation amount of the depth of
modulation
g Wet/Dry Dry, 1:99…99:1,
Wet Balance between the wet and dry signal
Src Off…Tempo See DMS (Dynamic Modulation Source)
Amt –100…+100 Amount of modulation source