KORG PA4X 76 - Manual (Page 680)

676| Effects for the Sounds
d BPM MIDI,
40.00…
300.00
MIDI syncs to the system tempo; 40–300
sets the tempo manually for this individual
effect
Time Over? ---, OVER! Displays an error message when the delay
time exceeds the upper limit
e Delay Base Note
…
Selects the type of notes to specify the de-
lay time
Times x1…x32 Sets the number of notes to specify the
delay time
f Feedback Position Pre, Post Switches the feedback
connection
g Feedback –100…+100 Sets the feedback amount
High Damp [%] 0…100 Sets the damping amount in the high range
h Input Level Dmod [%] –100…+100 Sets the modulation amount of the input
level
Src Off…Tempo Selects the modulation source for the in-
put level
i Wet/Dry Dry,
1:99…99:1,
Wet Balance between the wet and dry signal
Src Off…Tempo See DMS (Dynamic Modulation Source)
Amt –100…+100 Amount of modulation source
d: BPM
e: Delay Base Note
e: Times
The delay time is the duration of “Times” number of “Delay Base Note” note
values at the “BPM” tempo (or if “BPM” is set to MIDI, the tempo determined
by MIDI Clock).
d: Time Over?
You can set the delay time up to 5,290msec. If the delay time exceeds this
limit, the error message “OVER!” appears on the display. Set the delay time
parameters so that this message will not appear. “Time Over?” is only a
display parameter.