KORG PA4X 76 - Manual (Page 28)

24| Let’s start!
02 Setting up the pedals
and audio connections
Connecting the pedals
Connecting the damper pedal
Use the PEDAL > DAMPER connector to connect a damper pedal, like the
(optional) KORG PS1, PS3 or DS1H. The DS1H pedal supports all the nuances
of half-pedaling on some acoustic piano sounds. You can experiment how it
works by gradually pressing it down, and gradually releasing it, while playing
the
Concert Grand Sound.
If you need to change the pedal’s polarity and calibrate it, go to the Global >
Controllers > Foot page.
Connecting a pedal or footswitch
Use the PEDAL > ASSIGNABLE connector to connect a footswitch pedal like
the (optional) KORG PS1, PS3 or DS1H, or a continuous pedal like the (op-
tional) KORG XVP-10 Volume pedal or EXP-2 Expression pedal.
By default, this connector will work as an Expression pedal. If you want to
change the assigned function, or you need to change the pedal’s polarity
and calibrate it, go to the
Global > Controllers > Foot page.
What if the pedals do not behave correctly?
From time to time, you might want to recalibrate the pedals. Or you might
need to reverse the pedal’s polarity. See how to do in
Calibrating the pedal
and setting its polarity on page 750.