KORG PA4X 76 - Manual (Page 1057)

Installing the options |1053
Installing an additional internal drive
The HDIK-3 kit allows you to install a standard internal 2.5” SATA hard disk
drive in your Pa4X-61 (an additional drive comes as standard with Pa4X-76).
The hard disk drive is not supplied with the kit, so you will have to purchase
it separately. Do not use parts different than the one suggested by KORG,
or you risk to damage the instrument!
Precautions
• Installation of the kit is done at the user’s own risk. Korg will assume no responsibility for
any damage or injury resulting from its improper installation or use.
• Be sure to disconnect the instrument from the AC plug, before opening it.
• To prevent your body’s static electricity from damaging the board’s components, touch an
unpainted metallic component before proceeding with the installation.
• Never force the connectors, that can only be inserted in a way.
List of parts
Before beginning with the installation, be sure to have all the parts listed in
the following table. You also need a cross-point screwdriver (not supplied).
a HDD interface x 1
b HDD support x 1
c M3x6 TC screws x 6
d M3x4 TC screws x 2
Backup
Before installing or replacing the hard disk drive, please backup or save
your User data to an USB storage device, by using the
Media > Utility > Full
Resource Backup or Media > Save > All operations.