KORG PA4X 76 User Manual
Page 391
Editing the Sounds |387
trigger Mode (How)
Meaning
Cycle 2
As the above, for use with a different (and parallel) group of oscilla-
tors. Having two Cycle Trigger Modes allows for cycling stereo mul-
tisamples.
Random
As the above, but with a random selection of oscillators within the
assigned group.
Choosing a delay before note start
▪
Use the
Delay
parameter to set a lapse (0…5000ms) between pressing a
key (or in general triggering the oscillator) and hearing the beginning of the
sound.
Reversing the controllers
▪
Select the
OSC Off when Sound Controllers are On
checkbox to reverse
the way Sound Controllers work. With this parameter checked, the current
oscillator will not play when one of the Sound Controllers (Sound Controller
1, Sound Controller 2, Sound Controller Y+, Sound Controller Y-) is activated.
It should be applied to oscillators with the After Touch, Joystick Y+, Joystick
Y-, Normal, Legato, Legato Up, Legato Down, Non Legato, Cycle 1, Cycle 2,
and Random trigger modes, that can be turned off by using a footswitch or
the joystick programmed as a Sound Controller.