KORG PA4X 76 - Manual (Page 831)

Setting the audio outputs and the final effects |827
Sending Sounds and Drum Kits to the
audio outputs
Sounds from each part or track of the keyboard, the Style or MIDI Songs, as
well as each Drum family, can be sent to a separate audio output. This rout-
ing is global, and will not change when choosing a different Keyboard Set,
Style or Song.
Choosing the audio outputs for the Keyboard, Style, and the
Players
The Keyboard, Style, and each of the Players’s Sound can be sent to differ-
ent audio outputs.
1 Go to the Global > Style/Kbd , Player 1 or Player 2 page, depending on the
Sound you want to route to an audio output.
2 Choose an audio output (or output pair) for each of the parts/tracks.
audio Output Meaning
Left+Right The selected part/track is connected to the Left & Right outs, in ste-
reo. It is also sent to the PaAS Amplification System, if installed. The
part/track is also sent to the internal FX processors. You can use the
MASTER VOLUME slider to adjust the volume.
Out1+2 The part/track is connected to the 1 & 2 sub-outs, in stereo. It is not
sent to the internal FX processors. The MASTER VOLUME slider has
no effect on it.
Out1, Out2 The selected part/track is connected to the sub-out 1 or 2. It is mixed
to mono. It is not sent to the internal FX processors. The MASTER
VOLUME slider has no effect on it.