Calibrating the pedal and setting its polarity, 750 calibrating the pedal and setting its polarity – KORG PA4X 76 User Manual
Page 754
750| Controllers
Calibrating the pedal and setting its
polarity
From time to time, you might have to calibrate the pedals to use their full
range of values, without any ‘dead spot’. Also, this procedure allows to
choose the pedal’s polarity.
Calibrate the pedal
1
Go to the
Global > Controllers > Foot
page.
2
Touch the
Calibration
button in the area of the button to calibrate, to make
the
Damper & Pedal/Footswitch Calibration
dialog appear.
3
Fully press the pedal down, and while continuing to press touch the
Push
button to confirm the maximum value.
4
When the following dialog appears, release the pedal.
This manual is related to the following products: