KORG PA4X 76 - Manual (Page 167)

Advanced editing of the Sound sets |163
Activating and choosing the master effects
Each Sound can send its audio signal to one or more master effects.
Activate the master effects
1 Go to the Master Effects pages, and choose either the FX group A
(Accompaniment, Pads, Song) or B (Keyboard).
FX on/off
Selected FX
2 Turn on or off the master effect(s). Please keep in mind that master effects
are assigned to all the Sounds of the same group.
Choose the master effects
1 While in the FX A or FX B page, touch the name of the assigned effects to
open the FX Edit page.
Selected FX
FX edit parameters
FX mix and modulation
2 Use the pop-up menu on top of the page to choose an effect.
3 If needed, edit the effect parameters, as described in the part of the manual
dedicated to the Effects.
You can adjust the Wet/Dry mix of the master effects, but we suggest not to
touch it, unless you are editing the effects. To set the amount of effect, use
the individual channels’ send level instead (as explained below).
4 When finished editing, press the EXIT button to return to the previous page.