KORG PA4X 76 - Manual (Page 472)

468| Customizing and editing the Sounds
Assigning a sample to the selected zone
A zone always corresponds to a single sample.
▪ Use the Sample parameter to choose a sample.
To create a silent zone, create it and assign no sample to it.
Setting the zone parameters
▪ Use the Original Note parameter to automatically transpose the assigned
sample on the keyboard. When you play this note, the sample will sound
exactly as it was recorded.
By default, this parameter will match the
OrigNote (Original Note) value as-
signed when editing the sample in the Sampling > Sample > Edit page.
The note set with this parameter appears highlighted in the keyboard dia-
gram.
▪ Use the Level parameter to adjust the relative level of the selected zone. This
value can only be a negative offset to the overall volume of the multisample.
▪ Use the Pitch parameter to fine tune the selected sample in cents (1 cent =
1/100 of a semitone).
Overview of the assigned samples and zones
You can see the overall map of the samples assigned to the zones, and edit
their range on the keyboard.
▪ Go to the Sampling > Multisample > Key Assign page.
Samples
Multisample
diagram
Zones
▪ Scroll the zones by using the list of samples on the left of the page. Use the
big button with an arrow on top and to the bottom of the list to scroll the list
up or down.