KORG PA4X 76 - Manual (Page 588)

584| Effects for the Sounds
c: Amt
If Preset Type=V1 and Src=JS+Y, you can set this to +5 and move JS +Y to
control the effect in the order of V1›C1›V2›C2›V3›C3.
Rotary Speaker
This effect simulates a rotary speaker, and obtains a more realistic sound by
simulating the rotor in the low range and the horn in the high range sepa-
rately. The effect also simulates the stereo microphone settings.
Left
Right
FX Amt
FX Amt
FX Amt = 100: Mono In - Stereo Out / FX Amt = 0: Stereo In - Stereo Out
D
-mod
D
-mod
D
-mod
Mode Switch: Rotate/Stop
Speed Switch: Slow/Fast
Manual Speed Control
Speaker Simulation
Mic Distance
Mic Spread
Horn/Rotor
Balance
Horn
Rotary Speaker
Rotor
+
a Mode Switch Rotate, Stop Switches between speaker rotation and stop
Src Off…Tempo Selects a modulation source for Rotate/Stop
Mode Toggle,
Moment Sets the switch mode for Rotate/Stop modula-
tion
b Speed Switch Slow, Fast Switches the speaker rotation speed between
slow and fast
Src Off…Tempo Selects a modulation source for Slow/Fast
Mode Toggle,
Moment Sets the switch mode for Slow/Fast modulation
c Manual Speed
Ctrl Off…Tempo Sets a modulation source for direct control of
rotation speed
d Hore
Acceleration 0…100 How quickly the horn rotation speed in the high
range is switched
Hore Ratio Stop,
0.50…2.00 Adjusts the (high-range side) horn rotation
speed. Standard value is 1.00. Selecting “Stop”
will stop the rotation