Source]:pulm:trigger:delay – RIGOL DSG3000 Series User Manual

Page 96

RIGOL

Chapter 2

2-76

DSG3000 Programming Guide

[:SOURce]:PULM:TRIGger:DELay

Syntax

[:SOURce]:PULM:TRIGger:DELay
[:SOURce]:PULM:TRIGger:DELay?

Description

Set the pulse trigger delay.
Query the pulse trigger delay.

Parameter

Name

Type

Range

Default

Real

10ns to 170s

100us

Explanation

 You can use this command to set the delay between the start of the external

modulating signal and the start of #1 pulse of the pulse modulating signal

when "Int" modulation source is selected and "Ext Trig" mode is selected.

 When is set in "Number" form, the default unit is s. Besides,

can also be set in "Number + Unit" form, for example, 30ns.

 The default unit of the return value is s.

 After setting the trigger delay, you can use the up/down direction keys or

knob to modify the trigger delay at the current step. At this point, you can

query or set the current step using the

command.

Return Format

The query returns the trigger delay, for example, 3.

Example

:PULM:TRIG:DEL 3 /*Set the trigger delay to 3s*/
:PULM:TRIG:DEL?

Related

Commands