RIGOL DSG3000 Series - Manual (Page 108)

RIGOL Chapter 2 Command System
2-88 DSG3000 Programming Guide
[:SOURce]:SWEep:RESet[:ALL]
Syntax [:SOURce]:SWEep:RESet[:ALL]
Description Reset all the sweeps to the start point.
Explanation  If the current sweep direction is "Fwd", the instrument will stop the current sweep
and sweep from the start frequency or start level after sending this command.
 If the current sweep direction is "Down", the instrument will stop the current sweep
and sweep from the stop frequency or stop level after sending this commsnd.
Related
Command
[:SOURce]:SWEep:DIRection
[:SOURce]:SWEep:STATe
Syntax [:SOURce]:SWEep:STATe OFF|FREQuency|LEVel[,FREQuency]
[:SOURce]:SWEep:STATe?
Description Set the sweep state.
Query the sweep state.
Parameter Name Type Range Default
OFF|FREQuency|
LEVel[,FREQuency]
Discrete
OFF|FREQuency|LEVel|
LEVel,FREQuency
OFF
Explanation  OFF: turn off the sweep function.
 FREQuency: enable the frequency sweep function.
 LEVel: enable the amplitude sweep function.
 LEVel,FREQuency: enable the frequency and amplitude sweep functions at the
same time.
Return Format The query returns the sweep state, for example, FREQ.
Example :SWE:STAT FREQ
:SWE:STAT?