RIGOL DSG3000 Series - Manual (Page 87)

Chapter 2 Command System RIGOL
DSG3000 Programming Guide 2-67
[:SOURce]:PULM:DELay:STEP
Syntax [:SOURce]:PULM:DELay:STEP
[:SOURce]:PULM:DELay:STEP?
Description Set the pulse delay step of the double pulse modulating signal.
Query the pulse delay step of the double pulse modulating signal.
Parameter Name Type Range Default
Real 10ns to 10s 100us
Explanation  When is set in "Number" form, the default unit is s. Besides,
can also be set in "Number + Unit" form, for example, 2000ms.
 The default unit of the return value is s.
 After setting the pulse delay step, you can use the up/down direction keys or
knob to modify the delay at the current step. At this point, you can query or set
the pulse delay using the [:SOURce]:PULM:DELay command.
Return Format The query returns the pulse delay step of the double pulse modulating signal, for
example, 2.
Example :PULM:DEL:STEP 2000ms
:PULM:DEL:STEP?
Related
Command
[:SOURce]:PULM:DELay