RIGOL DSG3000 Series - Manual (Page 146)

RIGOL Chapter 2 Command System
2-126 DSG3000 Programming Guide
:SYSTem:DISPlay:UPDate[:STATe]
Syntax :SYSTem:DISPlay:UPDate[:STATe] ON|OFF|1|0
:SYSTem:DISPlay:UPDate[:STATe]?
Description Set the on/off state of the screen.
Query the on/off state of the screen.
Parameter Name Type Range Default
ON|OFF|1|0 Bool ON|OFF|1|0 ON
Explanation When the screen is turned off, the screen stops updating and is locked. At this point,
the measurement speed is improved. Pressing Esc can unlock the screen. Screen
lock is mainly used in remote operation mode.
Return Format The query returns 1 or 0.
Example :SYST:DISP:UPD OFF
:SYST:DISP:UPD?
:SYSTem:FSWitch:STATe
Syntax :SYSTem:FSWitch:STATe OPEN|DEFault
:SYSTem:FSWitch:STATe?
Description Set the power status of the RF signal generator after power-on.
Query the power status of the RF signal generator after power-on.
Parameter Name Type Range Default
OPEN|DEFault Discrete OPEN|DEFault NULL
Explanation  OPEN: select "Open" state. The RF signal generator starts directly after
power-on.
 DEFault: select "Default" state. You have to press the power key at the front
panel to start the RF signal generator after power-on.
Return Format The query returns Open or Default.
Example :SYST:FSW:STAT OPEN
:SYST:FSW:STAT?