RIGOL DSG3000 Series - Manual (Page 123)

Chapter 2 Command System RIGOL
DSG3000 Programming Guide 2-103
:STATus:OPERation:CONDition
Syntax :STATus:OPERation:CONDition?
Description Query the value of the condition register for the operation status register.
Explanation The bit 0, bit 2, bit 4, bit 6, bit 7 and bit 9 to bit 15 of the operation status register
are not used and will always be treated as 0, therefore, the range of the return
value are the decimal numbers corresponding to the binary numbers ranging from
0000000000000000 (0 in decimal) to 1111111111111111 (32767 in decimal) and of
which the bit 0, bit 2, bit 4, bit 6, bit 7 and bit 9 to bit 15 are 0.
Return Format The query returns the value of the condition register in integer. For example, 32.
:STATus:OPERation:ENABle
Syntax :STATus:OPERation:ENABle
:STATus:OPERation:ENABle?
Description Set the value of the enable register for the operation status register.
Query the value of the enable register for the operation status register.
Parameter Name Type Range Default
Integer Refer to "Explanation" 0
Explanation The range of are the decimal numbers corresponding to the binary
numbers ranging from 0000000000000000 (0 in decimal) to 1111111111111111
(32767 in decimal).
Return Format
The query returns the value of the enable register of the operation status register in
integer.
Example :STAT:OPER:ENAB 100
:STAT:OPER:ENAB?
:STATus:OPERation[:EVENt]
Syntax :STATus:OPERation[:EVENt]?
Description Query the value of the event register for the operation status register.
Explanation The bit 0, bit 2, bit 4, bit 6, bit 7 and bit 9 to bit 15 of the operation status register
are not used and are always treated as 0, therefore, the range of the return value
are the decimal numbers corresponding to the binary numbers ranging from
0000000000000000 (0 in decimal) to 1111111111111111 (32767 in decimal) and of
which the bit 0, bit 2, bit 4, bit 6, bit 7 and bit 9 to bit 15 are 0.
Return Format The query returns the value of the event register in integer. For example, 32.