RIGOL DSG3000 Series - Manual (Page 92)

RIGOL Chapter 2 Command System
2-72 DSG3000 Programming Guide
[:SOURce]:PULM:PERiod:STEP
Syntax [:SOURce]:PULM:PERiod:STEP
[:SOURce]:PULM:PERiod:STEP?
Description Set the step of the pulse modulation period.
Query the step of the pulse modulation period.
Parameter Name Type Range Default
Real 10ns to 10s 100us
Explanation  When is set in "Number" form, the default unit is s. Besides,
can also be set in "Number + Unit" form, for example, 5000ms.
 The default unit of the return value is s.
 After setting the step of the pulse period, you can use the up/down direction
keys or knob to modify the period at the current step. At this point, you can
query or set the pulse period using the [:SOURce]:PULM:PERiod command.
Return Format The query returns the step of the pulse modulation period, for example, 5.
Example :PULM:PER:STEP 5000ms
:PULM:PER:STEP?
Related
Command
[:SOURce]:PULM:PERiod
[:SOURce]:PULM:POLarity
Syntax [:SOURce]:PULM:POLarity NORMal|INVerse
[:SOURce]:PULM:POLarity?
Description Set the polarity of the pulse modulation.
Query the polarity of the pulse modulation.
Parameter Name Type Range Default
NORMal|INVerse Discrete NORMal|INVerse NORMal
Explanation The parameter NORMal|INVerse can set the polarity of the current pulse modulating
signal to "Normal" or "Inverse".
Return Format The query returns NORMAL or INVERSE.
Example :PULM:POL INV
:PULM:POL?