Trigger[:sweep][:immediate, Trigger[:sweep][:immediate] -131 – RIGOL DSG3000 Series User Manual
Page 151
RIGOL
DSG3000 Programming Guide
2-131
:TRIGger[:SWEep][:IMMediate]
Syntax
:TRIGger[:SWEep][:IMMediate]
Description
Trigger a RF sweep immediately.
Explanation
When the "Trig Mode" or "Point Trig" mode of SWEEP is set to "Bus" and the trigger
conditions are met, the instrument starts a RF sweep within the sweep period or
sweeps a point and then stops each time this command is sent.
Example
:TRIG:SWE
Related
Command