RIGOL DSG3000 Series - Manual (Page 75)

Chapter 2 Command System RIGOL
DSG3000 Programming Guide 2-55
[:SOURce]:LFOutput:SWEPtsine:LEVel:STEP
Syntax [:SOURce]:LFOutput:SWEPtsine:LEVel:STEP
[:SOURce]:LFOutput:SWEPtsine:LEVel:STEP?
Description Set the amplitude step of sweep-sine.
Query the amplitude step of sweep-sine.
Parameter Name Type Range Default
Real 1mV to 1V 0.5V
Explanation  When is set in "Number" form, the default unit is V. Besides,
can also be set in "Number + Unit" form, for example, 1000mV.
 The default unit of the return value is V.
 After setting the amplitude step of sweep-sine, you can use the up/down
direction keys or knob to modify the amplitude at the current step. At this point,
you can query or set the amplitude of sweep-sine using the
[:SOURce]:LFOutput:SWEPtsine:LEVel command.
Return Format The query returns the amplitude step of sweep-sine, for example, 1.00.
Example :LFO:SWEP:LEV:STEP 1000mV
:LFO:SWEP:LEV:STEP?
Related
Command
[:SOURce]:LFOutput:SWEPtsine:LEVel
[:SOURce]:LFOutput:SWEPtsine:MODE
Syntax [:SOURce]:LFOutput:SWEPtsine:MODE CONTinue|SINGle
[:SOURce]:LFOutput:SWEPtsine:MODE?
Description Set the mode of sweep-sine.
Query the mode of sweep-sine.
Parameter Name Type Range Default
CONTinue|SINGle Discrete CONTinue|SINGle CONTinue
Explanation  CONTinue: select "Cont" mode. When the trigger condition is met, the
instrument sweeps continuously at the current setting.
 SINGle: select "Single" mode. Send the
[:SOURce]:LFOutput:SWEPtsine:SINGle command and the instrument
performs a sweep according to the current setting and then stops when the
trigger condition is met.
Return Format The query returns CONT or SING.
Example :LFO:SWEP:MODE CONT
:LFO:SWEP:MODE?
Related
Command
[:SOURce]:LFOutput:SWEPtsine:SINGle