RIGOL DSG3000 Series - Manual (Page 79)

Chapter 2 Command System RIGOL
DSG3000 Programming Guide 2-59
[:SOURce]:PHASe
Syntax [:SOURce]:PHASe
[:SOURce]:PHASe?
Description Set the phase offset of RF output.
Query the phase offset of RF output.
Parameter Name Type Range Default
Real -720deg to 720deg 0deg
Explanation  When is set in "Number" form, the default unit is deg. Besides,
can also be set in "Number + Unit" form, for example, 35deg.
 The default unit of the return value is deg.
 After setting the RF phase offset, you can use the up/down direction keys or
knob to modify the phase offset at the current step. At this point, you can
query or set the current step using the
[:SOURce]:PHASe:STEP[:INCRement] command.
Return Format The query returns the phase offset of RF output, for example, 35.000000.
Example :PHAS 35
:PHAS?
Related
Command
[:SOURce]:PHASe:STEP[:INCRement]
[:SOURce]:PHASe:RESet
Syntax [:SOURce]:PHASe:RESet
Description Reset the current phase offset to 0deg.
Related
Command
[:SOURce]:PHASe