RIGOL DSG3000 Series - Manual (Page 71)

Chapter 2 Command System RIGOL
DSG3000 Programming Guide 2-51
[:SOURce]:LFOutput[:STATe]
Syntax [:SOURce]:LFOutput[:STATe] ON|OFF|1|0
[:SOURce]:LFOutput[:STATe]?
Description Turn on or off the LF output.
Query the state of the LF output.
Parameter Name Type Range Default
ON|OFF|1|0 Bool ON|OFF|1|0 OFF
Explanation
 ON: turn on the LF output and the backlight of the LF output control key
turns on.
 OFF: turn off the LF output and the backlight of the LF output control key
turns off.
Return Format The query returns 1 or 0.
Example :LFO:STAT ON /*Turn on the LF output*/
:LFO:STAT? /*The query returns 1*/
[:SOURce]:LFOutput:SWEPtsine:DWELl
Syntax [:SOURce]:LFOutput:SWEPtsine:DWELl
[:SOURce]:LFOutput:SWEPtsine:DWELl?
Description Set the sweep time of sweep-sine.
Query the sweep time of sweep-sine.
Parameter Name Type Range Default
Real 1ms to 1ks 1s
Explanation  When is set in "Number" form, the default unit is s. Besides,
can also be set in "Number + Unit" form, for example, 1ks.
 The default unit of the return value is s.
 After setting the sweep time, you can use the up/down direction keys or knob
to modify the sweep time at the current step. You can query or set the current
step using the [:SOURce]:LFOutput:SWEPtsine:DWELl:STEP command.
Return Format The query returns the sweep time of sweep-sine, for example, 1000.
Example :LFO:SWEP:DWEL 1ks
:LFO:SWEP:DWEL?
Related
Command
[:SOURce]:LFOutput:SWEPtsine:DWELl:STEP