RIGOL DSG3000 Series - Manual (Page 40)

RIGOL Chapter 2 Command System
2-20 DSG3000 Programming Guide
[:SOURce]:CORRection:FLATness:DELete
Syntax [:SOURce]:CORRection:FLATness:DELete
Description Delete a correction point in the flatness table.
Parameter Name Type Range Default
Integer
1 to the total number of rows in the current
table
NULL
Explanation  represents the row number of the flatness table. The total number of
rows is the total number of correction points in the flatness table.
 Each correction point corresponds to a frequency and amplitude.
 You can use this command to reduce the number of rows or use the
[:SOURce]:CORRection:FLATness:PAIR command to increase the number of
points in the table.
Example :CORR:FLAT:DEL 2 /*Delete the 2nd row of the flatness correction table*/
Related
Commands
[:SOURce]:CORRection:FLATness:COUNt
[:SOURce]:CORRection:FLATness:PAIR
[:SOURce]:CORRection:FLATness:LIST
Syntax [:SOURce]:CORRection:FLATness:LIST? ,
Description Query the flatness correction table data within the specified range.
Parameter Name Type Range Default
Integer
1 to the total number of rows in the current
table
NULL
Integer
1 to the total number of rows in the current
table
NULL
Explanation  : the number of the start row of the data to be acquired.
 : the total number of rows of the data to be acquired.
Return Format The query returns the flatness table data acquired, for example,
NO.1:2000000.000000 , 9.000000
NO.2:2500000.000000 , 10.000000
Example :CORR:FLAT:LIST? 2,2 /*Query two rows of correction data starting from the
2nd row of the flatness table and the query returns 2
rows of correction data*/
Related
Command
[:SOURce]:CORRection:FLATness:COUNt