RIGOL DSG3000 Series - Manual (Page 54)

RIGOL Chapter 2 Command System
2-34 DSG3000 Programming Guide
[:SOURce]:IQ:SAMPle:STEP
Syntax [:SOURce]:IQ:SAMPle:STEP
[:SOURce]:IQ:SAMPle:STEP?
Description Set the sampling rate step of the IQ wave table output.
Query the sampling rate step of the IQ wave table output.
Parameter Name Type Range Default
Real 1Hz to 10MHz 1MHz
Explanation  When is set in "Number" form, the default unit is Hz, for example,
3000. In addition, can also be set in "Number + Unit" form, for
example, 3kHz.
 The default unit of the return value is Hz.
 After the sampling rate step is set, you can use the up/down direction keys or
knob to modify the sampling rate at the current step. You can query or reset the
sampling rate using the [:SOURce]:IQ:SAMPle command.
Return Format The query returns the sampling rate step of the IQ wave table output, for example,
3000.
Example :IQ:SAMP:STEP 3kHz
:IQ:SAMP:STEP?
Related
Command
[:SOURce]:IQ:SAMPle
[:SOURce]:IQ:TRIGger:ARB
Syntax [:SOURce]:IQ:TRIGger:ARB
Description Manually stop outputting the waveform.
Explanation When selecting "Armed Auto" or "Armed Retrig" operation mode, you can use this
command to stop outputting the waveform and wait for the next trigger.
Related
Command
[:SOURce]:IQ:TRIGger:OPTMode