RIGOL DSG3000 Series - Manual (Page 10)

RIGOL
VIII DSG3000 Programming Guide
Document Overview
This manual introduces how to program the RF signal generator over remote interfaces in details.
Main Topics in this Manual:
Chapter 1 Programming Overview
This chapter outlines how to build the remote communication between the RF signal generator and PC and
how to control the RF signal generator remotely. Besides, it also provides a brief introduction of the SCPI
commands.
Chapter 2 Command System
This chapter introduces the syntax, function, parameter and using instruction of each DSG3000 command
in alphabetical order (from A to Z).
Chapter 3 Application Examples
This chapter provides the application examples of the main function of the RF signal generator. In the
application examples, a series of commands are combined to realize the basic functions of the RF signal
generator.
Chapter 4 Programming Demos
This chapter introduces how to program and control the DSG3000 in the development environments of
Visual C++, Visual Basic and LabVIEW.
Chapter 5 Appendix
This chapter provides various information, such as the command list and factory setting list.
Tip
The latest version of this manual can be downloaded from www.rigol.com .
Format Conventions in this Manual:
1. Key:
The key at the front panel is denoted by the following format: "Text Box + Key Name (Bold)" in the
manual, for example, FREQ denotes the FREQ key.
2. Menu:
The menu is denoted by the following format: "Character Shading + Menu Word (Bold)" in the manual,
for example, Frequency denotes the frequency item under FREQ.
3. Operation Steps:
The next step of the operation is denoted by an arrow "" in the manual. For example, FREQ 
Frequency denotes pressing FREQ on the front panel and then pressing Frequency.
Content Conventions in this Manual:
The DSG3000 series RF signal generator includes DSG3030 and DSG3060. The introductions of the
DSG3000 series commands in this manual are based on DSG3060, unless otherwise noted.