RIGOL DSG3000 Series - Manual (Page 76)

RIGOL Chapter 2 Command System
2-56 DSG3000 Programming Guide
[:SOURce]:LFOutput:SWEPtsine:SHAPe
Syntax [:SOURce]:LFOutput:SWEPtsine:SHAPe RAMP|TRIangle
[:SOURce]:LFOutput:SWEPtsine:SHAPe?
Description Set the shape of the sweep-sine waveform.
Query the shape of the sweep-sine waveform.
Parameter Name Type Range Default
RAMP|TRIangle Discrete RAMP|TRIangle TRIangle
Explanation  The sweep shape decides the cycle mode of multiple sweeps.
 TRIangle: select "Triangle" waveform. The sweep period always starts from
the start frequency to the stop frequency and then returns back to the start
frequency.
 RAMP: select "Ramp" waveform. The sweep period always starts from the start
frequency to the stop frequency.
Return Format The query returns RAMP or TRI.
Example :LFO:SWEP:SHAP TRI
:LFO:SWEP:SHAP?
[:SOURce]:LFOutput:SWEPtsine:SINGle
Syntax [:SOURce]:LFOutput:SWEPtsine:SINGle
Description Execute a single sweep.
Explanation  If the current sweep mode is "Cont", sending this command will change the
sweep mode to "Single". A sweep will be performed if the trigger condition is
currently met.
 If the current sweep mode is "Single", sending this command will enable a
sweep if the trigger condition is currently met.
Related
Command
[:SOURce]:SWEep:MODE