RIGOL DSG3000 Series - Manual (Page 72)

RIGOL Chapter 2 Command System
2-52 DSG3000 Programming Guide
[:SOURce]:LFOutput:SWEPtsine:DWELl:STEP
Syntax [:SOURce]:LFOutput:SWEPtsine:DWELl:STEP
[:SOURce]:LFOutput:SWEPtsine:DWELl:STEP?
Description Set the sweep time step of sweep-sine.
Query the sweep time step of sweep-sine.
Parameter Name Type Range Default
Real 1ms to 100s 1ms
Explanation  When is set in "Number" form, the default unit is s. Besides,
can also be set in "Number + Unit" form, for example, 1000ms.
 The default unit of the return value is s.
 After setting the sweep time step, you can use the up/down direction keys or
knob to modify the sweep time at the current step. At this point, you can query
or set the sweep time using the [:SOURce]:LFOutput:SWEPtsine:DWELl
command.
Return Format The query returns the sweep time step of sweep-sine, for example, 1.
Example :LFO:SWEP:DWEL:STEP 1000ms
:LFO:SWEP:DWEL:STEP?
Related
Command
[:SOURce]:LFOutput:SWEPtsine:DWELl
[:SOURce]:LFOutput:SWEPtsine:FREQuency:STARt
Syntax [:SOURce]:LFOutput:SWEPtsine:FREQuency:STARt
[:SOURce]:LFOutput:SWEPtsine:FREQuency:STARt?
Description Set the start frequency of sweep-sine.
Query the start frequency of sweep-sine.
Parameter Name Type Range Default
Real 100mHz to 1MHz 10kHz
Explanation  When is set in "Number" form, the default unit is Hz, for example,
3000. Besides, can also be set in "Number + Unit" form, for example,
3kHz.
 The default unit of the return value is Hz.
 After setting the start frequency, you can use the up/down direction keys or
knob to modify the frequency at the current step. At this point, you can query
or set the current step using the
[:SOURce]:LFOutput:SWEPtsine:FREQuency:STARt:STEP command.
Return Format The query returns the start frequency of sweep-sine, for example, 3000.
Example :LFO:SWEP:FREQ:STAR 3kHz
:LFO:SWEP:FREQ:STAR?
Related
Command
[:SOURce]:LFOutput:SWEPtsine:FREQuency:STARt:STEP