RIGOL DSG3000 Series - Manual (Page 89)

Chapter 2 Command System RIGOL
DSG3000 Programming Guide 2-69
[:SOURce]:PULM:DWIDth:STEP
Syntax [:SOURce]:PULM:DWIDth:STEP
[:SOURce]:PULM:DWIDth:STEP?
Description Set the #2 pulse width step of the double pulse modulating signal.
Query the #2 pulse width step of the double pulse modulating signal.
Parameter Name Type Range Default
Real 10ns to 10s 100us
Explanation  When is set in "Number" form, the default unit is s. Besides,
can also be set in "Number + Unit" form, for example, 3000ms.
 The default unit of the return value is s.
 After setting the #2 pulse width step, you can use the up/down direction keys
or knob to modify the width at the current step. At this point, you can query or
set the #2 pulse width using the [:SOURce]:PULM:DWIDth command.
Return Format The query returns the #2 pulse width step of the double pulse modulating signal, for
example, 3.
Example :PULM:DWID:STEP 3000ms
:PULM:DWID:STEP?
Related
Command
[:SOURce]:PULM:DWIDth
[:SOURce]:PULM:MODE
Syntax [:SOURce]:PULM:MODE DOUBle|SINGle|TRAin
[:SOURce]:PULM:MODE?
Description Set the mode of pulse modulation.
Query the mode of pulse modulation.
Parameter Name Type Range Default
DOUBle|SINGle|TRAin Discrete DOUBle|SINGle|TRAin SINGle
Explanation  DOUBle: set the pulse mode to "Double" to enable the double pulse
modulation mode.
 SINGle: set the pulse mode to "Single" to enable the single pulse modulation
mode.
 TRAIn: set the pulse mode to "Train" to enable the train modulation mode. At
this point, you can use the [:SOURce]:PULM:TRAin:LIST:INSErt command to
define the desired pulse train.
 This command is invalid when "Ext" modulation source is selected.
Return Format The query returns SINGLE, DOUBLE or TRAIN.
Example :PULM:MODE DOUB
:PULM:MODE?
Related
Commands
[:SOURce]:PULM:SOURce
[:SOURce]:PULM:TRAin:LIST:INSErt