RIGOL DSG3000 Series - Manual (Page 106)

RIGOL Chapter 2 Command System
2-86 DSG3000 Programming Guide
[:SOURce]:SWEep:LIST:LIST
Syntax [:SOURce]:SWEep:LIST:LIST? ,
Description Aquire the sweep values within the specified range of the sweep list.
Parameter Name Type Range Default
Integer
1 to total number of rows in
the current list
NULL
Integer
1 to total number of rows in
the current list
NULL
Explanation  : denote the number of the start row of the sweep data to be acquired.
 : denote the total number of rows of the sweep data to be acquired.
Return Format The query returns the sweep values acquired, for example,
NO.1:2000000 , 11.000000, 1
NO.2:3000000 , 12.000000, 1
NO.3:4000000 , 13.000000, 1
Example :SWEep:LIST:LIST? 2,3 /*Acquire 3 rows of sweep values starting from the
second row in the sweep list */
[:SOURce]:SWEep:MODE
Syntax [:SOURce]:SWEep:MODE CONTinue|SINGle
[:SOURce]:SWEep:MODE?
Description Set the sweep mode.
Query the sweep mode.
Parameter Name Type Range Default
CONTinue|SINGle Discrete CONTinue|SINGle CONTinue
Explanation  CONTinue: select "Cont" mode. The instrument sweeps continuously
according to the current setting when the trigger condition is met.
 SINGle: select "Single" mode. The instrument performs a sweep according to
the current setting and then stops when the trigger condition is met.
Return Format The query returns the sweep mode (CONT or SING).
Example :SWE:MODE CONT
:SWE:MODE?