RIGOL DSG3000 Series - Manual (Page 39)

Chapter 2 Command System RIGOL
DSG3000 Programming Guide 2-19
[:SOURce]:AM:WAVEform
Syntax [:SOURce]:AM:WAVEform SINE|SQUA
[:SOURce]:AM:WAVEform?
Description Select the AM modulation waveform.
Query the AM modulation waveform.
Parameter Name Type Range Default
SINE|SQUA Discrete SINE|SQUA SINE
Explanation  The parameter "SINE|SQUA" can set the AM modulation waveform to "Sine" or
"Square".
 When "Ext" modulation source is selected, this command is invalid.
Return Format The query returns SINE or SQUA.
Example :AM:WAVE SQUA
:AM:WAVE?
Related
Command
[:SOURce]:AM:SOURce
[:SOURce]:CORRection Command Subsystem
Command List:
 [:SOURce]:CORRection:FLATness:COUNt
 [:SOURce]:CORRection:FLATness:DELete
 [:SOURce]:CORRection:FLATness:LIST
 [:SOURce]:CORRection:FLATness:PAIR
 [:SOURce]:CORRection:FLATness[:STATe]
[:SOURce]:CORRection:FLATness:COUNt
Syntax [:SOURce]:CORRection:FLATness:COUNt?
Description Query the number of points of the current flatness correction table.
Explanation You can use the [:SOURce]:CORRection:FLATness:DELete command to reduce the
number of points in the table or the [:SOURce]:CORRection:FLATness:PAIR
command to increase the number of points in the table.
Return Format The query returns the number of points in the flatness table in integer. For example,
5.
Related
Commands
[:SOURce]:CORRection:FLATness:DELete
[:SOURce]:CORRection:FLATness:PAIR