RIGOL DSG3000 Series - Manual (Page 111)

Chapter 2 Command System RIGOL
DSG3000 Programming Guide 2-91
[:SOURce]:SWEep:STEP:SHAPe
Syntax [:SOURce]:SWEep:STEP:SHAPe TRIangle|RAMP
[:SOURce]:SWEep:STEP:SHAPe?
Description Set the step sweep shape.
Query the step sweep shape.
Parameter Name Type Range Default
TRIangle|RAMP Discrete TRIangle|RAMP TRIangle
Explanation  The sweep shape decides the cycle mode of multiple sweeps.
 TRIangle: select "Triangle" waveform. The sweep period always starts from the
start frequency or start level to the stop frequency or stop level and then
returns back to the start frequency or start level (when the sweep direction is
"Fwd").
 RAMP: select "Ramp" waveform. The sweep period always starts from the start
frequency or start level to the stop frequency or stop level (when the sweep
direction is "Fwd").
Return Format The query returns TRI or RAMP.
Example :SWE:STEP:SHAP TRI
:SWE:STEP:SHAP?
Related
Command
[:SOURce]:SWEep
[:SOURce]:SWEep:STEP:SPACing
Syntax [:SOURce]:SWEep:STEP:SPACing LINear|LOGarithmic
[:SOURce]:SWEep:STEP:SPACing?
Description Set the step sweep spacing.
Query the step sweep spacing.
Parameter Name Type Range Default
LINear|LOGarithmic Discrete LINear|LOGarithmic LINear
Explanation  The sweep spacing refers to the variation mode from one frequency or
amplitude to another frequency or amplitude within a step.
 LINear: set the sweep spacing to "Lin".
 LOGarithmic: set the sweep spacing to "Log".
Return Format The query returns LIN or LOG.
Example :SWE:STEP:SPAC LIN
:SWE:STEP:SPAC?