RIGOL DSG3000 Series - Manual (Page 119)

Chapter 2 Command System RIGOL
DSG3000 Programming Guide 2-99
[:SOURce]:SWEep:TYPE
Syntax [:SOURce]:SWEep:TYPE LIST|STEP
[:SOURce]:SWEep:TYPE?
Description Set the sweep type.
Query the sweep type.
Parameter Name Type Range Default
LIST|STEP Discrete LIST|STEP STEP
Explanation  LIST: select "List" sweep type. At this point, the RF signal generator sweeps
according to the current sweep list.
 STEP: select "Step" sweep type. At this point, the RF signal generator
performs step sweep at the current setting.
Return Format The query returns the sweep type (LIST or STEP).
Example :SWE:TYPE STEP
:SWE:TYPE?