RIGOL DSG3000 Series - Manual (Page 45)

Chapter 2 Command System RIGOL
DSG3000 Programming Guide 2-25
[:SOURce]:FM:WAVEform
Syntax [:SOURce]:FM:WAVEform SINE|SQUA
[:SOURce]:FM:WAVEform?
Description Select the FM modulation waveform.
Query the FM modulation waveform.
Parameter Name Type Range Default
SINE|SQUA Discrete SINE|SQUA SINE
Explanation  The parameter "SINE|SQUA" can set the FM modulation waveform to "Sine" or
"Square".
 When "Ext" modulation source is selected, this command is invalid.
Return Format The query returns SINE or SQUA.
Example :FM:WAVE SQUA
:FM:WAVE?
Related
Command
[:SOURce]:FM:SOURce
[:SOURce]:FMPM:TYPE
Syntax [:SOURce]:FMPM:TYPE FM|PM
[:SOURce]:FMPM:TYPE?
Description Select the current modulation type of FM/øM.
Query the current modulation type of FM/øM.
Parameter Name Type Range Default
FM|PM Discrete FM|PM PM
Explanation The parameter "FM|PM" can set the modulation type of the current operation to
"FM" or "PM".
Return Format The query returns FM or PM.
Example :FMPM:TYPE FM
:FMPM:TYPE?
[:SOURce]:FREQuency Command Subsystem
Command List:
 [:SOURce]:FREQuency
 [:SOURce]:FREQuency:OFFSet
 [:SOURce]:FREQuency:OFFSet:STEP
 [:SOURce]:FREQuency:STEP