RIGOL DSG3000 Series - Manual (Page 51)

Chapter 2 Command System RIGOL
DSG3000 Programming Guide 2-31
[:SOURce]:IQ:BASeout:LEVel
Syntax [:SOURce]:IQ:BASeout:LEVel
[:SOURce]:IQ:BASeout:LEVel?
Description Set the baseband output amplitude.
Query the baseband output amplitude.
Parameter Name Type Range Default
Real 0V to 1.5V 1V
Explanation  When is set in "Number" form, the default unit is V. Besides,
can also be set in "Number + Unit" form, for example, 1.1V.
 The default unit of the return value is V.
 After the baseband output amplitude is set, you can use the up/down direction
keys or knob to modify the amplitude at the current step. You can query or set
the current step using the [:SOURce]:IQ:BASeout:LEVel:STEP command.
Return Format The query returns the amplitude of the baseband output signal, for example,
1.100000.
Example :IQ:BAS:LEV 1.1
:IQ:BAS:LEV?
Related
Command
[:SOURce]:IQ:BASeout:LEVel:STEP
[:SOURce]:IQ:BASeout:LEVel:STEP
Syntax [:SOURce]:IQ:BASeout:LEVel:STEP
[:SOURce]:IQ:BASeout:LEVel:STEP?
Description Set the baseband output amplitude step.
Query the baseband output amplitude step.
Parameter Name Type Range Default
Real 0.1V to 0.5V 0.1V
Explanation  When is set in "Number" form, the default unit is V. Besides,
can also be set in "Number + Unit" form, for example, 0.2V.
 The default unit of the return value is V.
 After setting the baseband output amplitude step, you can use the up/down
direction keys or knob to modify the output amplitude at the current step. At this
point, you can query or reset the output amplitude using the
[:SOURce]:IQ:BASeout:LEVel command.
Return Format The query returns the baseband output amplitude step, for example, 0.200000.
Example :IQ:BAS:LEV:STEP 0.2
:IQ:BAS:LEV:STEP?
Related
Command
[:SOURce]:IQ:BASeout:LEVel